Prepping Your Deck for Staining

 Prepping Your Deck for Staining

Are you planning a deck or porch staining project? Adding a few coats of fresh stain to your wooden deck or porch is one of the easiest ways to beautify your outdoor space! It also protects and preserves it for years to come. But there are several important steps to take to ensure a good result when prepping your deck.

Inadequate prep is the most common reason for deck stain failure.

Set your deck up for success with these deck prep guidelines from Duckback Stain.

Get your staining project started!

Follow these guidelines to prepare for applying stains. Make sure the surface is clean (no dust, dirt, wood fibers or grease), dry and free from mildew. When a surface is not cleaned and prepared properly, the coating and project are at risk to fail.

  • Thoroughly sweep the deck to remove debris.
  • Liberally apply cleaner using a roller or pump sprayer (wear protective equipment to avoid contact with skin and eyes).
  • Allow the cleaner to set for 15 minutes. Mist your work area with a garden hose to keep it wet while the cleaner soaks into the wood.
  • After 15 minutes, work the cleaner into the surface using a stiff synthetic-bristle brush. Scrub to remove residue thoroughly.
  • Use a garden hose to completely rinse the cleaner from the wood.
  • You may apply stain or coating once the surface is clean, dull and dry.

Prepping Your Deck for Staining - Rinse Cleaner



Is Your Deck Beyond Repair?

Is it time for a brand-new deck? Get your deck project started today by requesting a project quote or scheduling an appointment at GNH Lumber to discuss your project.

Amazingly Simple Deck Designs Request a Quote